 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ruud silhouette ii only stop for few seconds?
I have a ruud silhouette II that is around 5 years old and we have the thermostat set at 72 but house will only get to about 68. The heater will run for 15 minutes and then shut off for about 30 seconds and fire back up again. I know my pressure sensor is starting to go bad.once in a while I have to tap on that side of the heater to get it to start. Could this also be making it run like it is now?
|
||||
Check out some similar questions!
I have a Rudd Silhouette model UGDG-07EAUER Serial # CW5O30Z F0194 4182 - The control board appeared burned and the Gas would not come on. I replaced the control board (honeywell) S9201A with a UT Board 62-24084-82 The draft motor comes one, The ignitor glows, The gas comes on and lights... and...
Dang thing won't stay heating. Sometimes will respond perfectly to set-back thermostat for weeks. Then has to be hit in the area of insignia, area of the draft inducer, before flame will start and fan start. The hitting involves significant trek outside, cold outside and inside. This has been...
I have a 10 yr old Ruud unit that has blown (2) 24vac 40va transformers. Can Anyone tell me what might be causing it. The first one was the original, the second one didn't last the night. Help Please. Thanks
I have a 10 yr old Ruud unit that has blown (2) 24vac 40va transformers. Can Anyone tell me what might be causing it. The first one was the original, the second one didn't last the night. Help Please. Thanks
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
