Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do I wire the hot water heater to breaker
[ 14 Answers ]
My husband is out of town and the electric hot water heater stopped functioning... the breaker at the main breaker box was tripping... I replaced the breaker at the main box... it still tripped... the hot water heater also has a breaker that connects to the main breaker box... I had to replace the...
Hot water heater circuit breaker
[ 4 Answers ]
I have a State Select hot water heater and the circuit breaker keeps popping I can reset it and it works for about a day, any idea what may be causing the issue
Hot water heater circuit breaker
[ 11 Answers ]
I had the same problem with my state select water heater. After replacing both upper and lower elements I found that it was the upper thermostat. My problem is this: The new thermostat has a slightly different configuration than my old one. This is all Home Depot and Lowe's carried. My...
Hot Water Heater Blowing breaker
[ 1 Answers ]
My 4 month old hot water heater decided to stop working. I went to check it out and found that it had blown the breaker because water had apparently leaked into the wires on the top of the heater and hence blew the breaker. My question is this- Is the hot water heater shot or is it fixable.
Hot Water Heater Wiring Issue
[ 3 Answers ]
I have replaced a hot water heater, and I used a 12/2 wire to provide my 240 volt service to the unit. Is the 12/2 wire safe? Do I need to use 10/2 wire? There appears to be no service problems with the 12/2 wire. View more questions Search
|