Ask Experts Questions for FREE Help !
Ask
    fortunegirl's Avatar
    fortunegirl Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 18, 2010, 10:19 AM
    Dodge durango 2000
    Can you still drive with error code p0340 if it start?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Dec 18, 2010, 12:19 PM

    It will start and run without the cam signal, but it will not run well. It shouldn't cost much to fix, however.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Voltage regulator 2000 dodge Durango [ 4 Answers ]

I have a 2000 Durango (4.7L). Starts fine, drives fine, however after 5 to 10 minutes of drivetime, the "check guages" light comes on and the battery voltage drops to nothing. What is wrong? Is there a voltage regulator in this model?

2000 dodge durango codes po743 [ 6 Answers ]

Code comes up as po743 truck running great

2000 Dodge Durango w/code p0320 and p0700 [ 2 Answers ]

My Dodge Durango recently has been occasionally not starting and sometimes it bucks while driving. The codes are p0320 and p0700. I looked these codes up and found the p0320 was crankshaft position sensor reference signal can not be found while the engine is cranking. And from what I've seen for...

2000 Dodge Durango overheating [ 2 Answers ]

I recently went out of town and on the way home, my car overheated forcing me to pull over. When I turned the car off, the radiotor was shaking very bad like it was out of water but when I checked it was full. I then was told that it might have been the thermostat. I replaced the thermostat,...

View more questions Search