 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
White rodgers thermostat change C to F?
How to change C to F ?
|
||||
|
|
|
||||
|
Very carefully,read the install instruction manuel. It tells you how to change from c to f
|
||||
|
|
|
||||
|
If you do not have the book can you tell me your th model? It depends of which oone you have there are differents ways.
|
||||
|
|
| Question Tools | Search this Question |
Check out some similar questions!
I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I have changed over to a Honeywell programmable thermostat model RTH7400. Did all the correct wiring as stated in the books but when set to cool, the heater kicks on instead of the central air conditioning. What...
I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I want to change over to a Honeywell programmable thermostat model RTH7400. I need help in trying to figure out the wiring part of this whole thing. Can someone out there please help. I would certainly appreciate...
We have a very old white roger thermostat for our gas furnace and are replacing it with a honeywell rth2310. Our current thermostat only has two wire one balck and the other white. Where do I make the connections.
Have both manfacturers schematics for individual thermostats but in trying to install the new Hunter I have 7 different color coded wires projecting from wall with no association to the terminals on the rear of the new plate. Tried continuity checks but there doesn't seem to be any use for at...
Hello, System is gas heat, no heat pump, air Trying to install new Hunter 44660 thermostat Old White Rodgers Wiring W- white wire RH RC Jumper on RC- red wire B-nothing C-blue wire
View more questions Search
|
