 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore Ultrawash Quiet Guard Deluxe - won't start
Hi,
My dishwasher (Kenmore model - 665.13749K601, maybe three years old) started acting up recently. Of all the cycles, Smart Wash was the only one which would work. Yesterday, it completely went dead, as if it had no power. After some troubleshooting which included resetting through control panel, unplugging the ribbon cable from the control module, the problem still persists. I can operate everything on the control panel except the Cycles buttons - none of them works. I am not sure if the problem is with the door latching mechanism (it seems to be engaging), or control panel or control module. Is there a way to verify the control panel and control module and isolate the problem. Also, is there a parts dealer who charges reasonable prices for these parts? I would appreciate any hints or advice on diagnosing the problem. Domestic peace is at stake, please help! |
||||
Check out some similar questions!
I have had my Kenmore UltraWash Dishwasher for 2.5 years and it started by not cleaning the upper rack at all. Just recently it is now barely cleaning the lower rack. I have been searching the internet and have noticed a lot of people running into problems with these dishwashers and was wondering...
I have the new part, just not sure how to install it.
No power. Dishwasher won't start. I checked the power wires and got 120 V. I inspected the wires in the control panel inside the door and found no loose connections and no charred wires. I can't figure out where the problem is.
I've had my Kenmore ULtrawash Quiet Guard Deluxe,#10040660 for a couple of years and it's only used for three months out of each year.Yesterday I noticed a couple of black spots near the bottom front outside door and I wiped it thinking I had spilled something. Alas, it was the paint that had...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
