Braynt plus 90i code 33

Steve9347 Posts: 1, Reputation: 1

New Member

Dec 16, 2010, 06:25 AM

Braynt plus 90i code 33

I have a Braynt Plus 90i that is showing code 33. I've tried toggling the LS and a restart, and beyond that I don't know what to do. Can someone help?

king999 Posts: 1, Reputation: 1

New Member

Dec 23, 2010, 12:49 AM

Tftt545t

Add your answer here.

Check out some similar questions!

Bryant plus 90i error code 43 [ 1 Answers ]

I have a Bryant Plus 90i furnace flashing error code 43. I'm pretty good at fixing it so far. It's 17 years old and I've replaced the blower and inducer motors. All that seems to be fine. I just check the ususal. New filters are in to give max airflow. Checked and cleaned the condensate trap...

Bryant plus 90i code 34 [ 9 Answers ]

Bryant plus 90i. A 355 mav I believe. Will not ignite. I get code 34 then code 14. I have read the codes and have tried cleaning the flame sensor, blowing out all the condenser tubes and the green wire ground wire is connected to the chasis. I have taken the flame box cover off and it still didn't...

Bryant furnace plus 90i problem [ 1 Answers ]

Bryant furnace "Plus 90i" will run, flash red light a couple of times, shut down, then gear up and run again. It can do this 4-6 times over the course of several hours while heating the house up to 68 or 70 degrees from an overnight temp of 61 degrees. The service techs have checked the...

Bryant evolution series 90i [ 5 Answers ]

I need some help. I am purchasing an older home built in 1959 ( 3,500 sq ft ) which has oil heat and I live in the northeast. I am removing the oil tank and heater and may purchase a new hvac system and I really am looking for the best system. I generally use a high end hvac company that has...