1987 trane furnace 80000 BTU will not start.

Harry100 Posts: 1, Reputation: 1

New Member

Dec 15, 2010, 02:38 PM

1987 trane furnace 80000 BTU will not start.

I have a 1987 trane furnace (80000 btu), which doesn't start. I turned the outside switch on / off several times but no noise. I know that the switch registers 120 volts. The inside door of the furnace states not to try to light the pilot light manually because it is equipped with electronic ignition /spark, etc. Any thoughts, help?

Check out some similar questions!

Blower motor of Trane XE80 furnace won't start [ 8 Answers ]

I have a Trane XE80 gas furnace. The purge motor and burner go on, but main motor won't run. LED flashing light flashes continuously when burner is on however, when the burner shuts off, the LED light flashes 4 times at an interval. I tried to look for a reset button on the main blower motor but...

Correct BTU size for purchasing new furnace [ 2 Answers ]

Trying to figure out correct BTU size for purchasing new furnace. Total living space of my 15 year old ranch home (including finished basement) is 2800 square feet. I currently have York Stellar 100,000 BTU single stage 92% efficiency furnace. Heating contractor wants to replace with Lennox G61...

Trane furnace will not start (video) [ 1 Answers ]

Hi all, I am trying to troubleshoot the issue the furnace I've been having for a week. Initially, control board was dead. I called a technician and he said that I need a new control board and pressure switch. I got pressure switch and I've gotten a used control board. Turned out the pressure...

Sufficient BTU gas furnace [ 1 Answers ]

I have a small condo that is approximately 790 square feet. It is a townhouse with 2 other units on either side. There is fairly good insulation in the attic but not so good in the floor where there is a garage underneath. On one of the open walls is a 12 foot sliding glass door (Anderson...

BTU Calculation estimating square footage for furnace [ 1 Answers ]

I had a 100,000 BTU furnace replaced with a 75,000 BTU 80% furnace. I have a two story house with a finished basement and was told the basement square footage is not used in calculating the square footage for sizing the furnace BTU's. I'm wondering if this is true? The two stories is...

View more questions Search

Check out some similar questions!

Add your answer here.