 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heat pump suction line stays very cool in heat mode
My two rheem split sytems are side by side outdoors. The 1.5 ton unit for my upstairs area seems to work OK, but the freon lines never get close to hot at the compressor or in the attic at the air handler. The other unit is 2.5 tons for the other two floors of my house. The suction line for this unit gets very hot to the touch. Both systems appear to be working normally and are doing OK with this cold snap. Aux heat comes on both units about the same amount. Is it possible for the smaller unit to be working normally with` lukewarm lines? Seems like something has to be wrong, yet tech checked it last weekand found it to be OK for charge and pressure.
|
||||
Check out some similar questions!
I am selling my house and the home inspector noticed that when you turn the heat on, the heat pump doesn't come on and goes to auxiliary heat. It works fine for air conditioning and when I call for heat at the stat and push the contactor in manually it is blowing cold air out of the condensing...
Installed a honeywell pro6000 stat on a carrier heat pump, cooling mode is heat pump
I have a new Carrier Infinity 25HNA636A310 compressor. Does it run in both speeds when in heat mode
The batteries died on one of the 3 Rbtshaw 9620s on my heat pump system. When I changed them the unit would not program, so I reset it to factory settings. Now it is programmable, but the zone it controla does not respond, and the AUX electric heat stays on. Anyone know what's up? Had to throw...
I have a 2 yr old heat pump.in heat mode at 40 deg outside I have 120 psi on the suction and 160 psi on the disc. 99 deg. At discharge from condenser.first season for heat.sounds like a stuck or leaking reverse valve. Any suggestions. Thanks ps I tried switching from air to heat a few times
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
