Burners won't light up

Check out some similar questions!

Why won't my burners on my furnace stay on ? [ 3 Answers ]

I can turn off power and turn on but when the burners come on they stay on for about 4 seconds and some time the one burner at the thermocoupler will not fire right away . Even when it does fire it won't cycle but 3 times but the blower never comes on . Where should I start to look ?

York diamond 80 furnace last two burners won't light [ 1 Answers ]

I have a York Diamond 80 furnace. The first two burners light up but the others won't. After about 4-5 seconds the burners turn off but the fan is till running and blowing out cool air.. What do I need to do other than calling someone.. Please help.. Thanks

Furnace burners won't stay on. [ 0 Answers ]

Im having issues with my gas furnace. When I turn it on the pilot lights up and the burner fires, but after about 10-15 minutes later the burner and sometimes the pilot light goes out. Any suggestions on what the problem may be?

Intermittent pilot light burns well but main burners do not light [ 1 Answers ]

I have an Olson furnace with intermittent pilot light with electronic spark ignition. There is a Honeywell S8610U furnace controller. When thermostat calls for heat the ignitor sparks and the pilot flame lights. The flame continues to burn while the ignitor continues to spark for about 5+...

Ignitor lights but burners won't stay lit [ 2 Answers ]

I have a GMP gas furnace, the ignitor lights, the burners light for about 15 secs. Then go out and try to re-light after about 30 secs. Ocassionly staying lit it's a 50-50 chance here. What do I need to do to correct this problem? Thanks for the help.

View more questions Search

Check out some similar questions!

Add your answer here.