 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Lennox mpd4035cne blower not working
Home is 3 years old. Count on one hand how many times natural gas fireplace has been used. Nonetheless tried to use and nothing happens. No fuses are blown. Test plug for current. That's fine. Safe to guess that blower is gone? Any other suggestion prior to dissassembling. Used tester on wiring for thermostat and flame work so thermopile is good.
|
||||
Check out some similar questions!
2 green lights flash on the furnace, but the blower want come on. It clicks like its going to come on but don't
Sorry for the double post but I couldn't find a way to edit the first one or delete it. Woke up nice and warm last night, upstairs ac had stopped working. Compressor outside is running, but no blower. Tried manually setting the fan from Auto to ON, nothing. Doesn't matter if I have it set to...
Have lennox G20 Q4 furnace. Burners work when called for but no blower. Blower will not run when selected at thermostat. Had a new circuit board for the G20 Q3 furnace, installed it. Result was blower ran prior to burners igniting and blower would not go off after burner shut down. Changed...
I have a 1000sqft town home with a Lennox furnace about 18 years old. My furnace blower is not working. I currently uneployed and job seeking and would like to avoid the cost of replacing the entire furnace. What sort of cost should I expect to replace the blower?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
