Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ground/Neutral Bus in Main Service Panel - Is there a Difference?
[ 8 Answers ]
I'm preparing to provide new wiring to a sizable addition to a log home. Prior to beginning the new work I mapped my existing circuits thinking it best to correct any potential overloads in the existing panel/circuit design before introducing any new problems on my own. Decided to make a few...
NO Ground bus bar
[ 2 Answers ]
I have A Square D Main panel. It has NO ground bus bar but 3 neutral bars. The neutral and ground wires are both in these bars. Is that O.K.
Neutral/Ground bus bar?
[ 6 Answers ]
I am installing a sub panel in my basement to run some extra circuits for a bathroom, spare room etc. I am putting a 60 amp fuse in the main service panel, running a 6-3 wire with ground and back feeding the new sub panel. The new panel does not come with a ground bus bar, and suggests using...
Adding a bus to a main panel for ground.
[ 2 Answers ]
I have recently added on a room to my house. I have a main power supply out side with a two pole 100 amp breaker the neutral and ground are on same bus, the ground continues down tocopper pole in ground. Upstream ihave added alager box to accommodate more poles. The new box has the two hot wires...
Why is the grounding and neutral bus bar connected in the sub panel?
[ 1 Answers ]
I had an electrician come in and install a new sub panel in my house and wire up my kitchen. When he finished, I took it from there. Now that I have the rest of the house wired, its time to connect it all to the sub panel. Both the neutral bus bar and the ground bus bar (2 separate buses) seem to... View more questions Search
|