 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Sewer ejector system maintaince
Every few years my float switch in the collector basin keeps getting coated and built up with sludge(?) preventing it from floating up to turn on the pump. Waste source is primarily 80% kitchen, 10% bathroom and 10% laundry. What type of cleaners/additives are available to pour through a sink or lav to disolve the buildup in the basin?
|
||||
Check out some similar questions!
The utilty room that houses my ejector pump gets smelly when the door is closed. I just bought the house so I don't know much about the system or it's history.
I have a new house, in the basement, the builder stubbed out for a bathroom. They also installed a Basin for a sewer ejection pump under the stairs (the main sewer line from the stubbed downstairs bathroom terminates into this basin.) The builder also installed a vent pipe up and out through the...
Don't have room for a engine hoist. Looking for a way to raise an 500lb Pump, without a engine lift from a 8ft Pit
I purchased a house 7 years ago that had a Sewer Ejector Pump. For 5 1/2 years, we had no issues with the pump. In July 2007 (1 1/2 years)our pumps were not working and we had them replaced. We spend $6000 on a new system which included new chamber, with dual pumps, alarm system, etc. IN Oct...
I saw a similar question brought up before. We have a sewer ejector pump (lift station) that has to transfer waste quite a ways across the street. Our pump frequently has issues and we have to have it cleaned 2-3 times a year minimum due to grease, float switch getting stuck and so forth. We now...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
