Bryant furance turns on for 10-15 min

NELSONFAN Posts: 2, Reputation: 1

New Member

Dec 9, 2010, 07:51 AM

Bryant furance turns on for 10-15 min

Then turns off for 1 second , turns on again . All day . Have ck. Filter . Service guy did not know why . Furance 14 years old . Have honeywell thermo . Please help dec. 9 2010

Check out some similar questions!

Bryant furance stays on 10 min then shuts down for 1 second turns back on [ 0 Answers ]

Gas water boiler turns off after lit 5 to 15 min. [ 2 Answers ]

Gas water boiler turns off after lit 5 to 15 min. changed thermocouple still same. Water boiler is new. Thermocouple located next to pilot & igniter sensor located on oppisite side. Thank you Giovanny

Furnace stays on for a min then turns off [ 3 Answers ]

We have a Wesco furnace all the model numbers are worn off so no help there. My problem is it will kick on blow hot air for a min then turn off for a min and then back on. What would be causing this thethermostat? Also how do I replace the filters when I don't know what filters it uses I'm new to...

Single 20amp circuit turns off 10 min turns back on [ 2 Answers ]

I have a problem with a single 20Amp circuit, there are two small rooms with receptacles and lights attached to this circuit. (Home built in 1976). The power goes out completely and the 20Amp breaker does not trip or get hot, there is not any power across the breaker and then approximately 10min...

Pressure Switch for Bryant furance [ 1 Answers ]

Can someone tell me how much a pressure switch for a Bryant furance should cost and is it difficult to install?

View more questions Search

Check out some similar questions!

Add your answer here.