 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Blower run all time on Lennox G12RD2E-55 fruance?
Tech was out and took replaced filters and cleaned fruance also set the settings down to 105 it was set to 180. The original problem was the blower runs all the time will shut off for a second then the heat kicks in starting the process all over again. Blower ran non stop last night and still going this morning when I left. Suggetions?
|
||||
Check out some similar questions!
The thermostat sends the signal for heat and the exhaust fan goes on, but the blower fan does not start and the furnace does not ignite. The fan blower does work if I manually turn the fan to on (instead of auto) at the thermostat. I tried tapping on the limiters, but it doesn't seem to help. ...
I have a 2 year old Goodman, gas, no heat pump. There is a flashing LED that blinks once ever 4 seconds. Also, blower motor does not stay on always. We did smell something like an electrical burn. I'm guess my blower motor is fried?
The main blower on my Rheem gas furnace is running longer than it should after combustion shut-down. This is a new quirk, with nothing obvious to explain the change except normal aging. The furnace has no companion AC and no fan-only wiring from the thermostat. Combustion sequence seems to be...
When I close the door switch the blower and induction motor run all the time. The led flashes 4 times. Have checked limits, no open circuit found. The diaphram switch opens and closes at the proper times. Have tightened the neutrel all the way to the breaker pannel. What am I missing? Thanks, Clyde
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
