 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
New Heat pump thermostat
I am replacing my Totaline thermostat with a "3M-22 Filtrete" programmable for my Rheem Heat pump. The Rheem has 2 stage heating Heat pump with Aux heat (heat strips). The correct wiring schematic calls for a W2 wire. What color is the W2 wire?
Jim |
||||
Check out some similar questions!
I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...
I am aware of the adjustable differential setting which is basically a dead band that the room temp can swing through. I guess I am not explaining the situation clear enough. I am looking for a timing adjustment for the on time of the heat pump before the thermostat calls for Aux heat. Say 10...
Could it be the wrong thermostat the unit model uqka a030jk the heat pump 7f62 heater kitrxqj
I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -
I have a Maple Chase SaverStat thermostat on a Lenox heat pump. The thermostat and heat pump are ten years old. Recently when the heat pump comes on the Aux. light on the thermostat also goes on (not the emergency heat light). I have checked and the auxiliary heat strips and they are not heating...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
