 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Clean light blink and repacing the heating element, kenmore ultra wash
We did all the procedures suggested on this site regarding the flashing clean light. It did start the machine again, but the light continues to blink after a short period. We are thinking that it is the heating unit at the bottom because it is not hot (genius).Is it difficult to replace and is the part expensive. And if I'm off base on this, let me know? Gracias
|
||||
Check out some similar questions!
We paid a Sears repairman to come out when we had a flashing "Clean" light on our dishwasher, A Kenmore Ultra Wash 665.1603 or 1703, and he gave us the diagnostic code (buttons to push on the operating panel) and we have used it again after that, but I cannot find the order of the buttons to push...
We have a two year old dishwasher that stops working at the drain cycle. First the 4 and 6 hour delay lights go on, then they go out, the dishwasher shuts down and the red light above Normal Wash blinks rapidly. I suspect that, because this occurs at the drain cycle, that the machine needs to be...
Kenmore ultra wash 665.15779990 lock light on
Our Kenmore Ultra Washer model 665 15631798 stopped working. The red control light is on. We tried turning off the power switch for half an hour and then switching it back on, but the red light is still on.:(
I have a Kenmore Ultra Wash dishwasher that is approximately 7 years old. About 3 days ago the lock light started blinking. I held the No Heat button for 4 seconds to unlock but it did nothing. I can push the cancel/drain button and that only causes them both to blink. I have tried cutting the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
