 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How do I add a third motion switch?
I currently have two 3 way motion switches controlling a 4 light circuit. I would like to add a third motion switch.However, this third switch does not have to be a motion switch, but a motion switch is preferred. My present system has a 12-4 wire running from MS #1 going to MS#2 and all works well. How to I add this next switch and what type of switch do I need.
|
||||
Check out some similar questions!
I have a circuit with a single switch connected to four outdoor lights. I would like to add two motion sensors so that either of them will trigger the lights to go on. Can someone please help me with suggestions and/or a wiring diagram? The motion sensors I have are like this one: Link. They...
How do I wire a three way motion switch.
I'm trying to add another switch to control the lights from both ends. I have a light switch by the door before we walk down stairs that turns it on and off. I want to put another switch at bottom of steps so we can turn it off from there to. I have all the right wires to do but my only problem is...
I have three exterior lights, which are controlled by one switch inside. I would like to add a motion sensor to control all three lights. I don’t want to use the inside switch anymore. Is it possible to add the motion sensor and if so where should it be added. Could someone please give me detailed...
I hope that this is possible, since I don't have the option of pulling new wire to this location. I want to add a receptacle next to an existing 3-way switch that controls a fluorescent light in a kitchen. Coming into the junction box is a single 12/3 nm cable, with a black, a red, and a white wire...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
