Ask Experts Questions for FREE Help !
Ask
    tommogler's Avatar
    tommogler Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 5, 2010, 10:30 AM
    Furnace
    The IDB starts up and runs properly to clean up exhaust. The Yellow Flame light comes on, Ing. Works properly and ignites gas. Flame on OK. As soon as the blower comes on the flame shuts off. The blower runs long enough to cool down the burner and shuts off and this all begins again. Over Temp Switch?

Check out some similar questions!

My Bryant furnace blows the 3 amp fuse when the furnace is kicked on, but ac works fi [ 0 Answers ]

Intertherm furnace e2eb-017hb runs briefly, shuts off, then furnace just clicks [ 3 Answers ]

I have an Intertherm furnace, e2eb-017hb. It comes on briefly, blows warm air, then shuts off, and a clicking sound comes from the coil contacts area. I have tested the t-stat, and also replaced a coil contact, thinking that was the problem. I would appreciate any help on what to do next.

Furnace Blower Motor Runs Constantly & Furnace or AC Won't Run [ 2 Answers ]

I have an Armstrong forced air (induced draft) natural gas furnace with central AC (made around 1990 -- Model: EG6H80DC14-1, Serial: A18315MNA). I had a problem at the end of the heating season where the blower motor would run continuously (even when the thermostat is turned to "off"). I thought...

Furnace not heating the house. Damper on the furnace not opening. Motor then shuts. [ 4 Answers ]

My forced-air furnace is not working correctly. The gas works heating the air in the furnace, but When the motor starts the damper doesn't open and the Motor shut down. I need suggestions?:mad:

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.