 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Janitrol 075-3 burner failing
"I have a Janitrol Furnace Model GMP 075-3 Rev B. There are three flame jets.
The first flame jet has the ignitor and the third flame jet has the flame sensor. Often, when the furnace is triggered by the thermostat, the first jet will ignite, just fine and the other two will flicker on and off, usually after the third time all three jets will stay on and the furnace will work as it supposed to. The Furnace will try three times and will then have to be reset. it seems to me that a valve may be sticking somewhere." |
||||
Check out some similar questions!
So, we've been having trouble with our furnace for a couple of years now, and we've had a tech come out twice without getting anything fixed. Here's what it does: The unit tries to start when the thermostat tells it to, i.e. it goes, ahem, "vro-" and cuts, no ignition, no flame, no fan, no nothing....
The fan kicks on but the unit does not fire.. just blows cold air... light on board blinks 4 times
First, I will say this is the biggest piece of crap I have ever seen. It never stays on. First it light the igniter then the valve opens and flames appear. Error code indicates possible flame sensor failure. Replaced flame sensor. After that the door safety switch failed so I jumped it out. Then...
I have a Goodman GMP 075-3 Furnace, but the manual is missing.does anybody know where I can find a downloadable manual on-line? Thank you
Jumped the thermostat, blower doesn't start, no flame, heard a click from the furnace when turning up tstat. Fuse on board was blown, replaced. Followed lighting instructions to no avail. Help please its getting chilly...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
