Ask Experts Questions for FREE Help !
Ask
    shawnsahdsev's Avatar
    shawnsahdsev Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 2, 2010, 06:46 PM
    Bryant Fault code 31 on my furnace being displayed, any suggestions
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Dec 2, 2010, 07:31 PM
    The pressure switch is not closing--- Resricted vent or condinsate drain. Turn the power off and then back on to the system to reset the conrtrol board. If it will not restart you got a restriction.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant furnace code 24 [ 2 Answers ]

First there was a code 24, Ireplaced the fuse, fan works, but not lighting of the flames to produce heat. Any sugestions as to the next step>

Carrier furnace fault code definition [ 1 Answers ]

I have a Carrier Weather Maker XFI and it is giving me a fault code of 3 2 , which says low pressure switch fault. Does anyone know how to fix this without bringing out a technician?

Bryant furnace code 33 [ 0 Answers ]

Fan starts up but no heat. Code 33 comes up.. pressure switch problem. Is it the switch or is the sensor line clogged?

Bryant furnace fault code 14 [ 1 Answers ]

I have a13 year old Plus 80 Model 331AAA which will stop for no reason. Shows error code 14 when it stops. Furnace has been thoroughly checked twice in past two weeks by technicians and they can't find any reason for the unit to stop. If I turn off the power switch on the side of the unit for a few...

Bryant fault code 12 [ 7 Answers ]

I have a Bryant 350MAV gas furnace. I am getting a fault code 12. Can anyone tell me what a fault code 12 means?

View more questions Search