Ask Experts Questions for FREE Help !
Ask
    chuckyy's Avatar
    chuckyy Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 2, 2010, 06:02 PM
    Replace shower temptrol mixer?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Dec 2, 2010, 06:14 PM

    What's the problem here, Chucky... why do you want to replace the "shower temptrol mixer"?

    What is the name on the shower valve?

    Let us know more, OK?

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Symmons Temptrol: Repair or Replace [ 3 Answers ]

Tried to install a new trim kit on a 20 year old Symmons Temptrol shower/tub valve, but broke the end off the spindle (TA-10). Currently debating on the overall benefits of - repairing the old Temptrol (new spindle, maybe need new washers and/or seals) - replace with new unit (which...

Symmons Temptrol shower gradually gets cold [ 18 Answers ]

Hi, I have a Symmons Temptrol shower and in the last month or so, the shower starts getting cold after 1 or 2 minutes. I have to keep turning and turning the dial to keep the water hot. I don't think it's the hot water heater because it's not even a year old and elsewhere in the house there is...

Temptrol bath and shower valve [ 3 Answers ]

Valve leaks when I move the bath to shower knob around. The leak comes from only that area. Can I fix this without replacing the whole valve.

Symmons Temptrol Shower/Tub Handle - [ 1 Answers ]

I printed off the internet the part breakdwon to my tub/shower one-dial Symmons Temtrol kit as I am trying to stop a slow leak out oif the tub faucet. I removed the screw and cap - and I can't get the handle off - is it hyst suppoosed to pull off once the screw is removed? That is how the...

View more questions Search