Ask Experts Questions for FREE Help !
Ask
    tonytalla's Avatar
    tonytalla Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 2, 2010, 02:27 PM
    Ng to lp conversion kit; how to install
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 2, 2010, 03:16 PM
    For what? Some older open flame space heaters need a new orifice, some appliances need a conversion kit and some have variable orifices and gas valves. Need to know what you are trying to do.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Conversion kit for Kenmore portable dishwasher? [ 0 Answers ]

I want to buy a Kenmore portable dishwasher and buy a conversion kit so the plumber can do a permanent installation. (No cabinets in kitchen, so dishwasher has to be portable style, with a laminate top and white side panels.) The model number according to Sears is 1774, but an on-line appliance...

Ceiling fan model ac-552, is there a conversion kit for removal of 3 lights [ 1 Answers ]

I have a model AC-552 ceiling fan which has three lights attached. Is there a "cap" available for removal of the lights. The cap would have to have a cap for each of the three lights or a single cap that has holes for the two pull chains and reverse lever.

GE Hotwater heater conversion kit from natural gas to propane [ 0 Answers ]

Can I convert a GE hot water heater Natural gas to Propane gas?if so where can I obtain a conversion kit?

Need a conversion kit (propane to NG) Bryant 90Plus [ 2 Answers ]

Where can I find a Bryant 90Plus furnace (Model 398A 048100) propane to natural gas conversion kit (308001-708)? The local distributor says they're obsolete. Any ideas or suggestions?

New Install:HW CT3500/new HP w/o heat kit [ 2 Answers ]

On my second try, following advice of AC guy and conforming to Honeywell diagram for "4-wire sgl stg HP (jumper intact), I have wired the HP to thermostat as follows: R=R+Rc; O=O; Y=Y+W; G=G; FUEL SWITCH set to E. Nothing works. On my first try I had R=R+Rc; G=G; Y=Y; C (Blue terminal) which should...

View more questions Search