Ask Experts Questions for FREE Help !
Ask
    pdeldebbio's Avatar
    pdeldebbio Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Dec 1, 2010, 10:33 PM
    8/10 circuits in home were dead. No breakers tripped, tripped breakers, no change.
    Home electrical
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Dec 2, 2010, 06:23 AM
    Need voltage tester to find a loose connection, bad breaker, etc.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    Dec 2, 2010, 07:48 AM

    If it is every other one, you may have lost a leg from the power company, or a breaker may be "half tripped", Does any 240 volt stuff work?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Attempting to install GFCI circuit breakers (3 wires for 2 breakers) [ 6 Answers ]

OK here is my situation I have a Siemens box in my home I'm installing GFCI breakers to bring it up to code for insurance purposes Only thing is 4 rooms in this home are for some reason wired together on 3 wires (red black and white) connected to two separate breakers (30 Amps each) (two rooms...

What breakers would I need [ 1 Answers ]

In my rv cabin I will have a small 4.6cubit foot refrigerator, a 5.0 small freezer, a small 2.5 gallon hot water heater, a small 5000btu a/c and 2 shop lights, I will have a 50amp hook-up, which breakers would I need to handle these things with a 50amp hook-up?

Adding tandem breakers for additional circuits [ 2 Answers ]

I am hooking up a 15kw generator with auto transfer switch to a 200 amp service house. The transfer switch has two 240 circuits available, along with 5, 15 amp circuits, and 3, 20 amp circuits. I am trying to decide how to use the 240v circuits. 1)Kitchen oven, 2)Laundry dryer, or just not hook up...

View more questions Search