Cannot lite the pilot light, have replace the thermocouple & still won't light

wjhaese Posts: 1, Reputation: 1

New Member

Dec 1, 2010, 05:02 PM

Cannot lite the pilot light, have replace the thermocouple & still won't light

Joshdta Posts: 2,549, Reputation: 45

Ultra Member

Dec 1, 2010, 08:10 PM

Will not light? Or will not stay lite?

T-Top Posts: 1,871, Reputation: 100

Ultra Member

Dec 18, 2010, 08:25 PM

You may have to take the pilot assembly apart and clean the pilot orifice.

Add your answer here.

Check out some similar questions!

KENMORE HOT WATER HEATER - pilot light won't light - replace ignitor switch? How long [ 0 Answers ]

KENMORE HOT WATER HEATER - pilot light won't light - replace ignitor switch? How long to do myself.. and level of difficulty?

Pilot light won't stay lite [ 2 Answers ]

My pilot light won't stay lite. The flame is blue and I changed the thermocouple. But the moment I let go of the button it goes out can someone please help me?

Pilot light won't stay on.already tried changing thermocouple [ 7 Answers ]

I realized 2 weeks ago that there was cool air coming out of my vents when my heat was on. I then figured out that the pilot light would not stay on. I changed the thermo couple and it seemed fine. It would stay lite and the heat was working. Last night I truned the heat on and the same problem...

If my Thermocouple is bad will my pilot light stay lite [ 2 Answers ]

My pilot lite will go out once in a while.I don't it is not do to wind either.the furnace will work for a will and then I find the pilot out. It will relite and we go through the cycle again.

Gas fireplace won't lite,pilot light is on [ 7 Answers ]

I turned my gas fireplace on and the pilot lit fine and stays on but I can not get the main fire to go on. I have cleaned the thermocouple and other device on other side of pilot and also tried jumping the thermostat at wall and at fire place but no luck.