 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore dryer starts but stops mid cycle
I have a kenmore dryer about 12 years old. It has been in storage for about 4 of those years. It is a model 110 66902691. I hooked it up and it runs for about 10 minutes and stops and will not start again for about another 10 minutes. Sometimes it just makes a loud noise like the motor is trying to start but the drum will not roll. And the drum is also hard to roll by hand. So my guess is that there is something wrong with the drum and it is causing the motor to shut off cause it is getting to hot. But I don't know how to fix it. I am good with my hands but have never had to work on a dryer before? Any suggestions? Please email need help! [email protected]
|
||||
Check out some similar questions!
I have been trying to figure out what exactly is up with our Kenmore dryer. We bought it new in 1997 and it has run like a champ till now. It still heats up and the drum still tumbles. In the regular drying cycle - you set the timer for 60 minutes and about 15 minutes into the cycle, the dryer...
My Kenmore dishwasher stops mid cycle. Originally, it stopped and the "clean" button flashed green. I reset the washer by following the suggestions on this site (thank you). It started again but then stopped during the wash cycle and then all of the lights go off. At that point I can reset it...
I have a kenmore series 90 electric dryer model number 110.67902790 which is about 10 years old. We replaced the heating element about 18 months ago for the first time because the cloths were not getting dry during the normal cycles. At that time, we did a thourough cleaning of the inside housing...
We have a GE electric dryer, model DRSR483EG0WW, which is about 1 1/2 years old. This week it would not start. We had a tech out who replaced the start switch. Now, it shuts down after about 10 minutes of use, but will restart after a few minutes. No noise occurs at shut down, it just acts as...
My Kenmore Elite, heavy duty, electric dryer stops mid cycle. There is heat but it doesn't finish the cycle so clothes are dry. Strangely, I tried flipping the breaker on-of-on (which was NOT tripped) and it started and finished the cycle. Now that doesn't seem to work. I've tried both cycles...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
