Ask Experts Questions for FREE Help !
Ask
    kholmc's Avatar
    kholmc Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 30, 2010, 05:02 PM
    Magic Chef dryer squeak
    My Magic Chef dryer (model no. CYE3005AYW) is intermittently making squeaks and squeals throughout the drying cycle. Sometimes it sounds soft, sometimes horribly loud and unbearable. It sounds like squeaking and metal scraping together, and I am hesitant to use it at all unless or until it can be fixed. Is this something I could repair myself? If so, how can I repair it?

Check out some similar questions!

My magic chef dryer has a high pitch squeak. What could this be and can I fix it? [ 2 Answers ]

My Magic Chef dryer is a few years old. It has starting making a high pitch squeak that remains for the whole drying cycle. What can this be and can I fix it myself? It still dries the clothes as before the squeaking. Thanks

Magic Chef Dryer won't heat [ 0 Answers ]

My Magic Chef Dryer will not heat. About a month ago my dryer did not heat and I replaced the thermo Switch 53-0771 and it worked great. Now it is doing the same thing again. I used a tester and got an OHM buzz on the switch and to both sides of the element. Will this tell me that the switch is...

Magic chef dryer [ 1 Answers ]

My dryer will run fine one day and the next it will buzz( longer than it was designed 2) and then start. If I open it to put more in it will buzz and not start. I tried unpluging it, diff temps, no temp. I'll take out all my stuff and push start and then it starts... I'am close to causing it VERY...

MAYTAG Magic Chef Dryer [ 1 Answers ]

My dryer heats up good but it takes several cycles to dry one load of clothes.Lately my wife has reduced the size of load so that it doesn't take all day to dry one load.How do I get to the inside of this dryer to check it out.

Magic Chef Dryer shuts off [ 10 Answers ]

PLEASE HELP! I have a Magic Chef dryer model #YE205KW. Recently, it stopped heating with no other problems. I replaced the high limit thermostat and the thermal fuse. It worked fine with the first load or two and now it shuts off after a few minutes of drying time. After a few minutes later,...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.