 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hi Macoyo: Here's the code in my area... Threaded brass or copper pipe shall not be used with gasses corrosive to such material. Corrosive is defined as a gas with an average hydrogen sulfide content of 0.03 grains per 100 SCF. Here, copper/brass can usually be used with propane gas, but not usually natural gas. All that being said, I think this is a question that needs to be answered by a local plumbing/gas inspector... ;) Let me know what they tell you, OK? I am always curious to hear what each town/city/state has to say in these things! Thanks... Mark |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have LPG Gas tank on the ground floor and want supply from it up to second floor distance is about 20 ft then *** tell me which type of pipe is more suitable and safe..?
Given steel and copper are dissimilar metals, is any special connector required to connect them as an underground supply line to sprinklers.
For a cast iron closet/toilet flange, should the Johnny bolts used to attach the toilet to the flange be made of brass or stainless steel or other? If brass, will it eventually corrode the cast iron closet/toilet flange?
Hi, I used a 9 inch section of black pipe (gas pipe) in my water line, because it was the right length and saved a trip to the store for galvanised. My wife tells me that this will cause the water to smell and taste bad, is she right? It'll be a major pain to replace that section, but she says I...
Is it going to cause the corrosion when connecting a galvanized steel nipple to a brass ball valve?
View more questions Search
|
