Ask Experts Questions for FREE Help !
Ask
    melmoni's Avatar
    melmoni Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 28, 2010, 07:34 PM
    I have replaced all pipes from my tub
    Before replacing the galvanized with PVC there were only leaks not drainage problems, but now the drains will do nothing. The sink clogs up into the tub and the sink pipe is lower then the tub line it connects at an elbow and cannot get the snake past that elbow. Could there be a venting problem. We even tried acid to relieve any blockages and that is not working. HELP
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Nov 28, 2010, 08:22 PM

    First off stop with the acid completely. Add some water every once in awhile to flush the acid out. Could just be a coincidence, sounds like your branch drain is clogged after the tub. Rod down by removing the over flow plate, rod with a 1/4" snake or rotary auger on a drill
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #3

    Nov 29, 2010, 06:07 AM

    We even tried acid to relieve any blockages and that is not working.
    I can not advise against using muratic acid, or any acid, in a enclosed area such as a rest room strongly enough. As a young boy I would take limed up toilet bowls out in the alley behind the shop and boil the lime out of them. Over half a century later my lungs still carry the scar tissue that the acid fumes caused. A few years ago I lost a good friend when he used a commercial drain cleaner containing sulfuric acid in a unvented bathroom. Acid IS NOT A GOOD IDEA to use to clear mineral buildup. Take it from one who's paid the price.
    You have a blockage downstream from the tub. Snake from the tub waste and overflow, (see image). You will run into the trap bend about 18 inched down but once past that you only have to put out about 15 more
    Feet. Good luck, Tom
    Attached Images
     

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I broke areally old plastic tub mount single handle fuacet and need it replaced now [ 0 Answers ]

I need a replacement faucet because the plumming is so old if I can't find a cover ill have to pull it all out. I think the brand is CSA and I think its 70's eara. From a mobile home

Laundry tub pump leaks is there a seal that can be replaced? [ 2 Answers ]

Laundry tub pump leaks is there a seal that can be replaced?

Replaced both vanity faucets, now nothing comes from hot in tub [ 0 Answers ]

I replaced both vanity faucets and shut off valves, now the hot water has no water coming from the spout in the tub in the bathroom

Replaced bath Faucet, Leaking pipes [ 5 Answers ]

Hi, I recently replaced a bath faucet. I had to replace the entire pipe (Galv) and the hardware store did not have the proper length. I used a 48" threaded pipe with a coupler and a 4" nipple to get the proper size. When I turned the water back on, there is a leak at the coupler. I would use...

Tub won't drain and pipes are replaced [ 2 Answers ]

My husband has removed the trap for the tub and replaced the pipes. The tub will still not drain. We have tried everything snaking , draino everything but a plumber. You can't get a plumber to even look at your problems for 6 months. We live in a hurricane Katrina zone in Louisiana. Any and all...


View more questions Search