Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Passed gas pressure test at 15 psi, but pressure slowly drops, is this OK?
[ 4 Answers ]
Passed inspection on our gas line for a remodel. Have about five capped gas outlets. Pressure held @ 15 psi for 15 minutes but slowly drops about one psi every half hour or so. Is this normal or do I need to search for a gas leak?
Water pump pressure builds too high and trips the pressure valve
[ 1 Answers ]
First I had to replace the breaker for the water pump because the breaker must have went bad because I had no power to the pump. Fixed that and everything worked fine. I had to shutoff the water supply to repair a leak in a pipe. After I repaired the pipe I turned the water back on and got no water...
New shallow well pump new huge pressure tank but water pressure is terrible
[ 11 Answers ]
When I had a smaller pump (shallow well) and small tank my water pressure was great. When I had to replace everything the person installing the system put a bigger pump and a huge pressure tank. It is the size of a 50 gal water heater. I replaced everything. Ever since then my water pressure is...
What is the correct suction pressure and head pressure for a 3 ton tempstar heat pump
[ 1 Answers ]
When the yellow jacket brand gauges are put on a 3 ton Tempstar heat pump what should the correct suction pressure and head pressure be. I suspect it to be overcharged in freon. Because it is freezing the compressor, accumulator tank and all the lines soild ice.
Do you add 30 410a freon pressure like you do r22 and r12 for high side pressure in c
[ 1 Answers ]
Do you have to add 30 to the ambeint air temp. like you do for r22 and r12 to R410a freon to get the proper high side pressure reading View more questions Search
|