 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Installing PS2 with a RF Modulator - looks like I need to adjust the vertical hold
I have a PS2 (the fat one). I'm trying to hook it up to a TV using a RF modulator. The TV works with the cable ( no box) and the picture is fine. When we switch it to the PS2, the picture comes up, but is split in half - it looks like I need to adjust the vertical hold. The problem is that nothing has a vertical hold to adjust.
|
||||
Check out some similar questions!
Honeywell Chromotherm III thermostat reads Hold AC and will not Hold Heat
[ 2 Answers ]
Chromotherm III thermostat reads Hold AC and will not Hold Heat--reverts back to Hold AC when run program is pushed.
Legal hold on bank account BUT I they put a hold on a larger amount than was in there
[ 1 Answers ]
A state marshall put a hold on my account because of a judement but the hold was for more than I had in my account what can I do?
I need to adjust the throttle speed on a Wizard lawnmower.can't find way 2 adjust,help
[ 0 Answers ]
Wizard Quatium XTE 1/c 6 hp lawnmower. I can't find where the throttle screw is. If anyone knows how, please, greatly appreciated.
Installing wall hung sink cabinet to hold granite top
[ 1 Answers ]
Calling All Cabinet Installers/Bath Remodel Contractors! Am helping my son remodel his teeny bath in a pre-WWII bldg. Have ordered a wall cab 18" deep X 24" wide X 24" high (KraftMaid). Have studied cab specs: 1/8" back panel conceals two 5/8" hanging rails (top/bottom) doweled/glued to 3/4"...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
