 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Having problem with my York Furnace.
Fan mode or heat is not working. Its not even blowing air. Its using White-Rodgers Model 50a50-241 Control. Please help.
I tried resetting the furnace power from the electrical panel. The control panel led is not flashing. Could the issue be with ignitor? I even opened the furnace panel and held the switch to start the unit manually but still no response from the unit. |
||||
Check out some similar questions!
I have a 19 year old York Stellar furnace. Model P1UCD12N04601B 57,000 btu's. This unit was salvaged from a military housing complex that closed in 1990. The unit shows very little wear. All the parts look new. The unit sat no operational for nearly 16 years. I removed the unit from the house...
I have a York Stellar Furnace in my newly purchased house. Furnace is 15 years old. Furnace is releasing hot air from front grills and heats up furnace room to 110 Degrees. I had a Bryant Furnace in another house and this never happened. All plenams and ducts are taped and sealed so the heat is...
How do you hook up a thermostat for a York furnace to the furnace?
I have a york furnace P2MD12H06401A after 1 hour it shuts down and gives a 2 flash error for a stuck pressure switch. The switch is new can it be wired wrong? The old one had 2 white wires piggy back and 1 blue wire. The new switch has 3 separate terminals
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
