Heating unit burner will not ignite? Circulation fan will not come on in auto

lingerlost Posts: 1, Reputation: 1

New Member

Nov 27, 2010, 04:58 AM

Heating unit burner will not ignite? Circulation fan will not come on in auto

chefpierce Posts: 56, Reputation: 3

Junior Member

Dec 26, 2010, 02:56 PM

Is there a flashing light on your furnace??

Add your answer here.

Check out some similar questions!

What causes the burner on a goodman heating unit to rapidly cycle on and of sometimes [ 1 Answers ]

I have bypassed the limit switch and roll out switches and that is not the problem. Could it be the flame sensor or circuit board?

My coleman heating unit fan will not come on in auto position [ 4 Answers ]

My coleman heating unit fan will not come on in auto position sometimes but the fan will run in the on position. Please help me diagnose the problem.

In heat modes, unit shuts off, but circulation fan does not [ 3 Answers ]

I have a single stage heat pump and a hunter model #44360 thermostat. Put in this summer, worked fine all summer. Now that we want to use the heat, an issue has come up. The unit kicks on and heats to the desired temp. Then the unit shuts off. The fan for circulationg the air however does not....

Auto/ on switch on Goodman/Amana Heating/cooling unit [ 2 Answers ]

I have a Goodman/Amana heating and cooloing unit (Model # PTC073B35AE) that is hooked up to a remote thermostat. What shoud the auto/on of the unit itself be placed at. It seems to be running too much and my elelctric usage is way higher than should be.

Heating unit won't turn on in AUTO setting [ 1 Answers ]

My upstairs heat will not turn on in the AUTO setting . I hear the click on the thermostat for it to turn on but the fan will not blow. I can turn it on to "FAN ON" and it will blow but when I change it back to "AUTO" the fan shuts off and won't come on. Any ideas?