 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Rheem imperial 80 plus inducer motor is not working
I have two units of Reem Imperial Plus in the basement. Just doscoved that motor is very hot (on top) and I can hear electrical current sounds but no motor is running. When I checked the hose attached to the motor(?), blowing the hose do nothing but when sucking it, it ignites the gas. Is this problem of the motor?
|
||||
Check out some similar questions!
After reading several posts on other subject I realized that draft inducer may not need to be on all the time. I just want confirmation that it is normal or not. Since I moved to the house the furnace was working the same way for 10 years. As I am typing now furnace is working and inducer wheel...
Just a quick question.
I have carrier gas furnace model 58msa, inducer motor is not working. Any answer, how to replace it?
I found the part #66847 Inducer motor ($200) for my 1992 Rheem Criterion RGDG... The ball bearings were going bad and HVAC companies want from $500 to $890 to replace it. Is it hard or anything tricky about replacing it yourself? I can order the part and try it myself or order the part and have...
Can someone tell me what part number and where I can get a replacement inducer motor on a Rheem Criterion, circa 1992, model RGDG-150ARJR? Already had someone come out and said ball bearings were going bad and motor should be replaced. They wanted to charge me $400 for the motor alone. I see...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
