Ask Experts Questions for FREE Help !
Ask
    jdrakern's Avatar
    jdrakern Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 25, 2010, 06:08 PM
    Kenmore quiet wash top rack not getting clean
    Top rack wand is not spinning and spraying water.
    Pump is putting water to the wand but not a lot of pressure.
    Dishes on the top rack are not getting clean!
    Do you have any idea as to what the problem is and how to fix it?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Nov 25, 2010, 08:10 PM
    Make sure the screen in the bottom of the washer is clean. Water enters the sump through this screen and if it has been plugged by food or debris, it will pump but with reduced pressure. You may have to unscrew the spray arm connector to pull the screen and clean it if dirty.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore UltraWash Quiet Guard 3 Dishwasher no Longer Cleaning the Top Rack [ 37 Answers ]

I have had my Kenmore UltraWash Dishwasher for 2.5 years and it started by not cleaning the upper rack at all. Just recently it is now barely cleaning the lower rack. I have been searching the internet and have noticed a lot of people running into problems with these dishwashers and was wondering...

How to clean a Kenmore Ultra Wash Quiet Guard [ 2 Answers ]

We have a two year old dishwasher that stops working at the drain cycle. First the 4 and 6 hour delay lights go on, then they go out, the dishwasher shuts down and the red light above Normal Wash blinks rapidly. I suspect that, because this occurs at the drain cycle, that the machine needs to be...

Top rack dishes of Kenmore dishwasher not getting clean [ 2 Answers ]

I have a Kenmore Ultra Wash that doesn't seem to be cleaning the top rack dishes as well as it used to. The soap is often not all out of the dispenser and things that used to be clean after a cycle are still dirty. I suspect water isn't getting to the top rack. Any ideas?

View more questions Search