 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Old Honeywell Sequencer
HVAC 1000
I have an old Honeywell Sequencer Part number R833OF from a Coleman Presidential Heater It's a single blower 3 element heater. In a 2007 posting you noted a sequencer number of 3115-3157. The sequencer part number I listed from Honeywell is over 35 years old and is no longer available. Can I retrofit that sequencer with the one you listed in 2007? The Coleman Presidential Furnace is model number 6806A 15KW Electric Furnace. 5KW elements, 20.8 Amps each |
||||
Check out some similar questions!
Change sequencer then had to tap fan relay to make fan come on. Change relay now making funny humming noise
I have goodman A30-10 furnace and one of the two heating elements is bad and the sequencer isn't working. Does anyone know the part numbers for the replacements and a good place to find them cheap online? Thanks.
My daughter electric furnace needs a sequencer. She has a Radco furnace with (I belive)a warren 3 coil 15kw total heaters. The bad seq part no is 15sh4 309706. I have schearched the internet for the part number but unable to locate the part. I went to a heating company and they gave a supco q103...
How do you replace the sequencer on an Intertherm Furnace by Central Electric? The model # is FEH-012HA-03 Appliance # E0000088245, 240v 60hz 1ph, 51.3 amps.
Hello, Shopping around for recording software PC based. Looking for a product that can sequence, arpeggiate, chord hold etc.. via midi from my DX 7 and in turn drive the dx using these methods. Kind of like the old analog 80's synth which had most of these features built in the more $ units....
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
