 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Metric bolt head markings
Suzuki, at least as recently as 2008, has provided a table of standard bolt torques in their motorcycle service manuals that refer to metric bolt head markings. Two values are listed for each bolt size. The first is for Conventional or "4" marked bolt[s] and the second for "7" marked bolt[s]. The table includes figures showing bolts either unmarked or with a large 4 or 7 on the head.
I am aware of ISO strength grade markings like 8.8 or 10.9 but cannot find any information that correlates with the Suzuki markings. Is this a Suzuki or Japanese system or what? |
||||
Check out some similar questions!
Hello, My snow thrower started making a knock sound under hard load recently... it is only 2 years old very little use... I think perhaps the head bolts are loose... no visible exhaust leaks... and every time I heard the knock I shut it down... any thoughts and anyone know the torque specs for...
Blew head gasket on 18.5 horse briggs ohv does anyone know the proper torque specs head bolts Thanks in advance Rick
I'm replacing the head gasket on my 95 altima. When I pulled of my valve cover I was supprised to see that they are HEX bolts (damn it! ) I don't have a large set and I'd like to buy just the size I need. So anyone know what size they are? Thanks
I'm building a "mud room" inside our garage. The width is 5' (13' length) and the joists are 2x6 24" o.c. I have ledger on both sides. My issue is that in 2 places I have lag bolts at the edge of the joist, so it gets in the way of the joist and the hanger. Some options seem to be (1)move the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
