 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Amtrol purger vent cap- how tight?
I have a FHW heat system with an Amtrol air purger. On top of the vent there is a small plastic red cap. How tight should this cap be? Is it normal for a small amount of water to leak out of the vent when the cap is not tight? Last year I had the system serviced because water was leaking. The service man told me to tighten the cap down all the way, but when I do this, it does not seem to purge properly.
|
||||
Check out some similar questions!
I bought a house that has a copper gas line that used to go to a gas dryer. I no longer have the gas dryer and don't intend to get another. The previous owner didn't cap the line. I was willing to give the excess line to the plumber who came for a different job, if he capped the line (he supposedly...
The threads for the trap on my bathtub are rusted. I can not loosen the plate. Should I use a torch?
Hi there, I am trying to fix an old Goettl gas pack unit. It worked fine till 2 weeks ago. Now it starts normally with colder air for like 4-5 minutes then it sends inside warm air , no cooling . From outside I can see the condenser fan blade starting to rotate for those 4-5 minutes , low RPM...
So, at 3 am when I'm trying to sleep the jet pump clicks on just for a moment , then a few minutes later it clicks on again momentarily, repeat, repeat... This probably happens at other times as well, but it's not so annoying then; then I can ignore the problem. Also, sometimes the Pumptrol needs...
Greetings. Any info gratefully appreciated. My well water pressure is running wild. I have an AMTROL WX-202 tank. The well provides plenty of water. However, the pump is turning on and staying on while pressure continues to rise. It shows no sign of stopping at 80 psi. Then I kill the power and...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
