Rewiring the "on switch for a Trane 2 stage vs

Check out some similar questions!

Second stage xl 80 trane turns off [ 4 Answers ]

I have Trane XL 80 furnace which started to malfunction recently. The heater starts correctly and heats the house for about 5 minutes, after that the flame goes out and does not restart. It would try to restart after a minute or 2 and again the burner would not start. It tries for 2 or 3 times and...

Two stage vs single stage heat pump compressors- How much energy does a 2 stage save? [ 1 Answers ]

I am comparing 5 ton heat pumps; some with 2 stage compressors and some with single. Does the two stage really save that much energy when on a 5 ton compressor? Is it worth an extra $1200?

Which is better a trane, Lennox or a bryant - 2 stage [ 2 Answers ]

I live in California and am getting a new furance. The variable speeds are two expensive. So I am going with a two stage 95% afue. Which do you all recommend a trane, lennox or a bryant. Bryant is the cheapest, but I can't find any information on line about it. Trane seems to bear better...

Trane XL 80 Won't Enter Second Stage [ 6 Answers ]

My tenants have a Trane XL 80 2 stage furnace. The unit works fine on the first stage. I know after about 10 minutes a second stage kicks in and the furnace blows harder. The second stage is no longer kicking in. I opened door on furnace and vacuumed dirt. Furnace filter has been changed. I cleaned...

Hvac1000: Or ing stage relays (multi-stage stats to single stage) [ 1 Answers ]

Would you agree that you can and should OR the outputs of say a 2 stage heating stat to make it a single stage? OR means connect the outputs together. Example: Connect W and W2 to create a single stage stat. I'm under the impression that either W1 or W2 is activated and not both and that this...

View more questions Search

Check out some similar questions!

Add your answer here.