 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Wiring assistance for honeywell heating thermostat?
I purchased a #RTH6350 Honywell thermostat. It will be used to control only oil heat from the furnace. There is only two wires white and green coming from the power supply line. Does the white and green lines get attached to the slots labeled white and green on the thermostat? Thanks
|
||||
Check out some similar questions!
Hi everyone. My Honeywell Chronotherm IV Plus thermostat has always worked great but for some reason hasn't been heating since yesterday. I use the "Hold" function and set it to a temperature which it then heats to and holds. Since last night, I've had the heater set to 75 but the temperature in...
I am looking for a new thermostat for my home heating. I have an oil burner that uses water in baseboards ( I believe hydronic) the current theromstat uses a 12/2 wire that goes to it. This wire has a black, white and nuetral. The current thermostat is very straight forward and these wires...
Just bought a Honeywell RTH230B programmable thermostat. I have 2 wires from a Coleman furnace model # 7995-856, this has a switch to change from heat to A/C. Right now I have it wired as the direction indicate for heat (Rh and W). As the weather is warming up I will soon have to switch the...
I am trying to replace a White-Rogers 1F95-1277 thermostat with a Honeywell Digital Thermostat. I have the Honeywell RTH110B, but, it is not compatible. Any ideas what model Honeywell Digital Thermostat (for 5-wire) is compatible with the White-Rogers 1F95-1277 (which is old - 7 wires)?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
