Ask Experts Questions for FREE Help !
Ask
    Louisemylove's Avatar
    Louisemylove Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 16, 2010, 12:10 PM
    Furnace Fan Will Not Start?
    Furnace fan will not start, I have an old furnace about 15-20 years old. The thermostat is old and so is the motor. The pilot light is lit and the furnace will light but no air is blowing through the vents. Where should I start?
    cliff53's Avatar
    cliff53 Posts: 3, Reputation: 1
    New Member
     
    #2

    Nov 29, 2010, 03:29 PM
    Blower

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lennox G20 gas furnace fails to start the fan [ 6 Answers ]

My Lennox G20 gas furnace ignites the pilot light and starts the main burners. The burners burn normally for about 2 minutes and shut down without the blower fan starting. If I manually set the blower fan to run continuously, the heater cycles on heats the house to the temperature set on the...

Goodman Furnace blower (fan) does not start [ 4 Answers ]

The furnace and blowers is little over a year old. It was reportedly making some screeching noise then stopped and it almost sounded like it attempts to start then it stops. I don't know where and what to look for start trouble shooting. Any help would be appreciated!

Electric furnace fan won't start in auto [ 3 Answers ]

I don't know the model of the unit but it is electric and is at least 15 years old. It has a RiteTemp thermostat. In the auto mode the blower will not turn on, it makes noise, but won't go. If I turn it to the on position it blows cold air. If I switch it back to auto after a few minutes in on it...

Why does my gas-furnace not run? (fan-blower won't start) [ 4 Answers ]

Hi Why does my gas-furnace not run? (fan-blower won't start) I could not see any blown fuses or circuit-breakers; power-switch is on; I ignited the pilot-light and turned the temp to 90 in thermostat - but fan-blower did not start at all, even after waiting for 10 min; I measured voltage at fan...


View more questions Search