 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Janitrol pilotless Furnace buzzes when turned on
When I turn on the heat from the thermostat, the furnace simply buzzes and I can feel a slight vibration from what I believe to be the motor. I don't think it's the ignitor as I replaced it 1.5 years ago, it does not seem to be getting a signal to turn on, it remains black.
Any help is appreciated. Thanks, Eric |
||||
Check out some similar questions!
I hit the power on my furnace and the board hums for a few seconds and then blinks three times . Ihave checked for blockage in vent and is fine. Ihave blowed pressure switch and it clicks is it the switch board or air blower that won't start.
I have to down to the basement and manuel turn the blower on it will not go on on auto only manuel what do you think is wrong thanks tboy56
Hi, I'm new to this forum and wonder if someone could help me out. I recently came home and noticed a bad smell in the house. I wondered if it was gas, but my wife described it as a burning rubber smell. This is what is happening. The furnace turns on. The flames are burning real good and...
Could someone please enlighten me. I want to buy a direct vent furnace that does not have a pilot burning all the time. I've read about a 'matchless pilot". Is that what I want?
I have a Carrier furnace that is approximately 15 years old. The model is 58GP. It has a Honeywell Continuous Pilot Combination Gas Control valve - VR8200H. This control buzzes upon the furnace kicking on - about 75% of the time. Somtime after the blower starts, the buzzing stops. The...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
