Thermostat wiring

rskwared Posts: 1, Reputation: 1

New Member

Nov 14, 2010, 04:52 PM

thermostat wiring

I have 8 wires in my wall: G, O X2, Y, T, R, W, B are the port labels on my old thermostat. The new 1 has G, RC/RH JUMPER, Y/O, W/B, Y1. Only 6 will be used on new thermostat. Which ones do I match n which do I not use?

Check out some similar questions!

Goodman furnace guso50-2 thermostat wiring instructions for 2 wire thermostat [ 2 Answers ]

Looking to hook up a 2 wire heat only thermostat as the door with the weiring diagram is missing it's a goodman guso50-2?

Wiring codes from old Carrier thermostat to new Hunter thermostat [ 1 Answers ]

WIRING CODE HELP FOR THERMOSTAT I am in an office and have an old Carrier programmable thermostat which no longer works. I purchased a Hunter 44660 thermostat to replace. My problem is that the wiring codes on the previous thermostat do not match up the codes on the new thermostat. Codes and...

I have a hot water heating system , the thermostat uses 12/2 wiring what thermostat [ 5 Answers ]

I am looking for a new thermostat for my home heating. I have an oil burner that uses water in baseboards ( I believe hydronic) the current theromstat uses a 12/2 wire that goes to it. This wire has a black, white and nuetral. The current thermostat is very straight forward and these wires...

Ge thermostat to hunter thermostat wiring diagram [ 1 Answers ]

I'm trying to wire a hunter 42999b to 1977 ge heat pump. Need to know what wires go where there are more wires on old one then what connects to new one!

Wiring direction for a multi wiring system thermostat! [ 3 Answers ]

I have a 2 wire system (3 phase), need to connect multi wiring system thermostat! Need to know if, its correct to just use line#1, and the device already has a jumper?

View more questions Search

Check out some similar questions!

Add your answer here.