Ask Experts Questions for FREE Help !
Ask
    office's Avatar
    office Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 13, 2010, 04:06 PM
    Where can I get a wiring diagram for emegency brakes for a 2008 Z06 Corvette
    I need to know where I can find a wiring diagram for the emergency brakes on a 2008 Z06 corvette.
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #2

    Nov 15, 2010, 06:16 AM
    When the switch at the park brake mechanism is closed, a path to ground is created and the Instrument Panel Cluster (IPC) telltale or light is lit.
    Does that telltale illuminate when you cycle the key to ON?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I need the wiring diagram for a 40" 12 horse, wiring for solonid&starter [ 3 Answers ]

I need the wiring diagram for a 12 horse murray 40" cut approx 2000 model is 40605B from the solonid to starter

2008 Mitsubishi Raider installed 4 way wiring harness [ 1 Answers ]

I have a 2008 Mitsubishi Raider with a 4 way wiring harness that was installed by the manufacturer. I hooked 2 trailers up to my truck and I could not get neither the turn signals or the brake lights to work. I can get the regular lights to work. What can cause this?

Corvette brakes [ 1 Answers ]

Hi folks. Son has a 77 Vette that has lost brake pressure. Master cyl. Is full and I've found no leaks anywhere. Soon as we start the engine the pedal goes right to the floor.My first guess is the vacuum booster. He's recovering from a foot injury in Quantico right now but will be able to drive...

Brakes 2005 Honda Accord brakes? [ 3 Answers ]

How hard are the brakes pads on a 2005 honda Accord to change?

John Deere - My dog ripped the wiring Out - Need Wiring Diagram or photos [ 2 Answers ]

I have a 3 year old L110 that ran fine until last week. I think my dog chased a chipmunk up under the hood and in trying to get to him ripped a bunch of wires out. I have spliced back together the obvious wires (color coded) but I have one black wire that I assume is a ground(?) and the two...

View more questions Search