Ask Experts Questions for FREE Help !
Ask
    NOGOGLO's Avatar
    NOGOGLO Posts: 8, Reputation: 1
    New Member
     
    #1

    Nov 13, 2010, 09:10 AM
    York 4 ton Heat pump model EDFH which ices
    I have a 13 years old York 4 ton Heat pump model EDFH which ices when the temperature gets below 32F.
    The problem with this pump started when the card became defective about three months ago when the temperature was in the 70's F.
    I called a tech and they replace the card with a universal card (I guess a clone) and the machine was then working fine as long as it was not too cold outside.
    Now we are into November and one morning the system was on emergency heat when I got up in the morning. It was around 32F outside so Went and looked at the pump and there was about 1" of ice around the whole unit. So I put the pump on emergency until the ice melted and then turned it back on to normal heat. It worked fine until the temperature dropped again and overnite the unit froze again.
    I called the tech and after checking the sensor and replacing it he said if that did not solve the problem he would install a timer on the new card and that should do it. Is he right? Is my heat pump too old? I had another one previously that ran trouble free for 20 years.
    We will be leaving for Florida for the winter and I am concerned that this problem may cost us a lot of grievance and money (emergency heat for 6 months must cost a bundle in Montreal).
    Please direct me to the proper solution if you disagree with the timer solution.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Nov 13, 2010, 12:48 PM
    You have a heat pump in Montreal? Usually those are not effective above Phila. Or NYC. Anyway, there is a defrost cycle in a heat pump, either electric or through a reverse solenoid. 1 of these may be bad. I'd get a couple of experienced people to look it over. Unless you have a "Cold Climate" heat pump, I'd look into NG or Propane heat?
    NOGOGLO's Avatar
    NOGOGLO Posts: 8, Reputation: 1
    New Member
     
    #3

    Nov 13, 2010, 01:01 PM
    Comment on ma0641's post
    Heat pumps are efficient in cold temperature to 0F for your information.
    Like I said in my question I owned a heat pump for 20 years prior to this one which is 13 years old. Whenever the tem goes below 0F the system reverts to emergency el heat
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #4

    Nov 13, 2010, 01:32 PM
    Comment on ma0641's post
    You probably have a Cold Climate unit designed for your area, as I opined. The solution I offerred is still the same.
    NOGOGLO's Avatar
    NOGOGLO Posts: 8, Reputation: 1
    New Member
     
    #5

    Nov 13, 2010, 01:48 PM
    Comment on ma0641's post
    Thank you I appreciate you comment

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heat Pump Ices Up when cold outside [ 3 Answers ]

My Heat pump which is a Trane and 20 year old iced up a few weeks ago. The HVAC technician said nothing was wrong , that when the temperature is below freezing I need to turn on the emergency heat. I did that a received a $430 electric bill this month. I have not had this problem for 19...

4 ton York Heat Pump [ 5 Answers ]

I have a 4 ton York heat pump that just suddenly started making a screaching sound when the heat pump comes on. It makes the noise almost all the time so I turned of the heat pump and have been heating with the emergency heat for the last few days. A repair man told me that probably my compressor...

Replacing an old Honeywell Thermostat with a Hunter Model 44260 to a York Heat Pump [ 0 Answers ]

I have an older Honeywell thermostat with wiring G(green) W(white) R(red) X(blue) B(black) O(orange) & Y(yellow). My new programmable thermostat Hunter 44260 has G R/C R/H Y/O W/B & Y1. Which wires go where on the new 44260 thermostat? The manual is not easy to understand. Thanks! D


View more questions Search