 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Mobile home furnace problem
I live in a trailer. My furnace uses kerosene. I recently had the blower motor and pump replaced as well as the filter and nozzle. The kerosene tank is full. However, when the furnace turns on, it runs for a few minutes and then turns off and the little red trip light goes off. And the blower doesn't turn on. What could the problem be?
|
||||
Check out some similar questions!
My miller home furnace MMHA-077ABHR-02 has a UT Electronic Controls 1018 series hot surface ignitor that is repeatedly flashing 3 times. Furnace goes through the cycle for starting, solonoid for gas opens momentarily and shuts right back off, and furnace will not light.
In the summer my air will cut on and run through its cycle then cut off like its should but when it kicks back on the fan out side on the unit will not cut on so I have to turn the switch on the furnace in the hall to off then cool over an over till you hear the out side unit cut on and the coolent...
I have an older mobile home with a Payne model sx242nb furnace that I think needs to be replaced. I live in las vegas{boulder city} Who sells a replacement or repairs them
I purchased a mobile home 18 months ago and replaced the water heater in April ($1,600) and now I need a furnace. It is an Intertherm MGHA 075 A8FC-01 and 16 years old. According to the first two repairpersons there is a hole in the heat exchanger and they said it is more cost effective to...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
