Bryant 350mav furnace won't stay lit runs 30 seconds and turns off

Check out some similar questions!

Gas furnace pilot won't stay lit [ 1 Answers ]

About 1 month ago pilo light wouldn't stay lit so I replaced the thermocouple.. The unit worked fine for about 2 weeks. After that when relighting it would go out after 1 day or so. Bought a new thermocouple and this one would only keep the pilot lit for 1 to 2 hours. Reinstalled the thermocouple I...

Furnace burner won't stay lit [ 2 Answers ]

I have an older model Night & Day model c100u series 510 gas furnace. The burner won't stay lit when the thermostat kicks on. I replaced the thermocouple but the burner still lights then immediately goes out. Any help?

Bryant 350MAV only runs in the mornings [ 6 Answers ]

Hi Everyone, I have a strange intermittent problem with my Bryant 350MAV furnace that has arisen in the last couple of months, since the weather started to cool here in Los Angeles. I usually turn off the thermostat at night when I go to bed, then manually turn on the heat in the morning when...

Goodman furnace won't stay lit [ 1 Answers ]

I have a goodman furnace that goes like this. Inducer fan comes on, 10 secs later glow lights up, 10 secs later get blue flames 10 secs later blue flames goes out. Repeats 3 times I have replaced the flame sensor still same problem But here is the thing. I am only getting 10 volts to the...

Bryant furnace flame won't stay lit after a few minutes [ 8 Answers ]

I have a Bryant Plus 80 model 395C that is 17 years old. I turned the furnace on this weekend and it starts up just fine. The draft blower starts, the igniter glows, the valve opens and it lights the burners. After it heats up the blower comes on as always. After about 3-5 minutes the burner goes...

View more questions Search

Check out some similar questions!

Add your answer here.