Ask Experts Questions for FREE Help !
Ask
    wbaldassarri's Avatar
    wbaldassarri Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 10, 2010, 06:12 PM
    Trane Dual Fuel with fossil fuel kit to VP IAQ stat with outdoor sensor
    I would like to get rid of my TAYPLUS103A which is malfunctioning. I recently purchased a new VP IAQ with outdoor sensor for HP lockout. I am a little confused on wiring.

    My HP has the following connections:
    T (not used)
    O
    X2
    Y
    R
    B

    My furnace control board has the following connections:
    G
    W
    R
    C
    Y

    Questions:

    Do I wire both the HP Y connection and Furnace Y connection to the VP Y connection?
    Do I wire both the HP X2 connection and Furnace W connection to the VP AUX connection?

    All the other connections and stat programming make sense. Thanks for your help!

Check out some similar questions!

Can I eliminate Fossil fuel kit with new HZ432 Zone Controller? [ 1 Answers ]

I would like to upgrade my 4-zone heat pump system (Dual Fuel) to a new 4-zone controller. My question is... will a Honeywell HZ432 Zone Controller allow me to eliminate the systems current TAYPLUS 103 Fossil Fuel kit for a much simpler control package? I would like to retain all of the two stage...

Generator Tri-fuel converison kit? [ 4 Answers ]

Has anyone used or had any experience with a "tri-fuel" converison kit for a generator? Thinking of buying a generator for back-up power but don't want to rely on having large amount of gasoline stored. I've read about converting to use Propane, natural gas or gasoline. Trying to get input from...

Tri-fuel converison kit? [ 9 Answers ]

Has anyone used or had any experience with a "tri-fuel" converison kit for a generator? Thinking of buying a generator for back-up power but don't want to rely on having large amount of gasoline stored. I've read about converting to use Propane, natural gas or gasoline. Trying to get input from...

Xv90 dual fuel [ 3 Answers ]

XV 90 furnace with dual fuel (gas + heat pump). First thing in the AM when heating up after night setback, stat shows "aux heat", but system is very slow to reheat the house when the outside temp is low 30's when the heat pump should be running. Suction line is hot but furnace does not seem to be...

Fuel sensor? [ 1 Answers ]

My truck is having problems starting, like it is not getting any fuel, it only happens every now and again, but is getting more frequent. I was wondering if it might be a fuel sensor, if so how do I tell?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.