Fed. Pac. Baseborad w/thermostat btn 2 phases. Need to replace themostat

Check out some similar questions!

Replace Brant standard thermostat with HOneywell thermostat [ 40 Answers ]

HI guys, I have a Bryant Heat Pump system with axilaury heat and A/c, I want to replace the Honey programmable thermostat, but still reluctant to install it myself since the wire label different. My new Honeywell model is TH6110D1005 and it has following wire label. G O/B (W) C Y R Rc ...

JI Visa Holder Exempt for fed OASDI/EE Fed MED/EE ? [ 5 Answers ]

Hi I am doing residency in psychiatry, currently in first year on J1 visa. My University is holding OASDI/EE and Fed MED/EE taxes from my salary, while my colleague who is also in first year and on J1 visa is not entitled to these taxes. What I have understood so far after searching for all...

Gap btn wall & counter, Materials to USE? [ 1 Answers ]

I have taken off 1 section of the back laminate counter piece off the wall in my kitchen. Interestingly enough, what I found was a piece of plywood which had been wallpapered. The remaining of that plywood (btn this piece and the upper cabinets) had been primed over the wallpaper. I was just...

Replace T87F thermostat with digital thermostat [ 1 Answers ]

My T87F has two wires Red and White. No code indicating how to connect to the new digital on.

Need to replace thermostat? [ 2 Answers ]

Problems with programmable Honeywell thermostat and heating. New batteries put in a week ago. Basically it isn't necessarily following the scheduled program. Get up in the morning and the house is cold, cold, cold. The fuse box has a line run to the furnace. The line runs through a mounted...

View more questions Search

Check out some similar questions!

Add your answer here.