 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
My York Stellar heat pump runs for some time normally. Then the thermostat light starts blinking 4 times (error code 4). However, the discharge line gets normally hot. It will work OK again for a time after I reset the error code. Thanks for the help PJ
A couple of questions about my 7 month old York YZB02411 with the MV12BN21 air handler, MC30B3XH1 coil and Braeburn 5200 thermostat. First, for this configuration, would you please indicate all of the correct low voltage wiring connections between all units. Secondly, what does it mean when the...
I have a 4 ton York heat pump that just suddenly started making a screaching sound when the heat pump comes on. It makes the noise almost all the time so I turned of the heat pump and have been heating with the emergency heat for the last few days. A repair man told me that probably my compressor...
If we run the fan continually will that make the heat pump not run? Also, how cold does it have to be before the heat pump won't run, it's -5 right now.
I have a older york heat pump that a technician came out to try to repair. He said the board was bad and tried to wire it so that the out side heat pump would run to keep the House cool. Well I found out what had happened to the board (Relay was pulled away from the circuit board from the fan wire...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
