Trouble light trane 5 flashes?

zemana Posts: 1, Reputation: 1

New Member

Nov 10, 2010, 07:03 AM

Trouble light trane 5 flashes?

5-flashes... flame sensed with gas valve closed... I replaced flame sensor and temperature limit switch. Still flashing 5 times... any suggestions?

Check out some similar questions!

My furnace fault code light flashes three times the pause and flashes three times aga [ 3 Answers ]

My furnace fault code light flashes three times the pause and flashes three times again and repeats. What is wrong?

My TRANE XV90 is giving me 3 flashes of red. [ 0 Answers ]

My TRANE XV90 is giving me 3 flashes of red then a heart beat of green. What does that error code mean?

Trane furnace flashes 4 times [ 0 Answers ]

I have a Trane Furnace MODEL#TUE040A924K0 SERIAL#M182PX42G and the ignitor does not start up. I replaced the ignitor and cleaned the sensor, but the ignitor still does not work. At the control box there is a red flashing light 4 flashes pause then 4 flashes. What can I do to get the ignitor started?

Trane XL90 won't heat -- 5 led flashes [ 2 Answers ]

I hava a Trane XL90 furnace that was installed new about 3 years ago (oct 2006). Yesterday it stopped heating; and only blows unheated air out the registers. The Control board Red LED flashes a code 5. The Green LED is flashing slowly. The local HVAC company looked at it and concluded that...

Dianostic light flashes 3 times on trane xr80 [ 1 Answers ]

I have a trane xr80 furnace, the dianostic light is flashing 3 times and furnace won't light, what can I do

View more questions Search

Check out some similar questions!

Add your answer here.